- Fan Type
-
Blowers
-
Inline
-
Vane Axial
-
Roof Exhaust
-
Plenum
The following Greenheck fan model and performance was used to determine the system effect values. | |
Fan Model: | |
Velocity (ft/min): | |
Pressure (in wg.): | |
Most calculations are based on AMCA Publication 201-02 (R2011). Actual results may vary. | |
OK |
Please Select Fan Type | |
OK |
Volume Loss - the expected percent of volume (CFM) lost in the system with the inlet and outlet conditions you selected. | |
OK |
RPM Increase - the expected percent increase in fan speed (RPM) the fan must be increased to overcome the inlet and outlet conditions you selected. Keep in mind the max fan speed must not be exceeded. | |
OK |
Power Increase - the expected percent increase in energy consumption (bhp) to overcome the inlet and outlet conditions you selected. Keep in mind the max fan speed and max motor size must not be exceeded. | |
OK |
Inlet System Effect - this is the effective additional static pressure loss (in wg.) due to the poor inlet condition. | |
OK |
Outlet System Effect - this is the effective additional static pressure loss (in wg.) due to the poor outlet condition. | |
OK |
Total System Effect - the is the total effective additional static pressure loss due to the poor inlet and outlet conditions. | |
OK |
The following Greenheck fan model and performance was used to determine the system effect values. | |
Fan Model: | |
Velocity (ft/min): | |
Pressure (in wg.): | |
Most calculations are based on AMCA Publication 201-02 (R2011). Actual results may vary. |